Pages from
Go
Video
Test-CCTV28
User Manual
www.allthings.com.au
popular protocols are available, like elco P, Pelco D, Samsung, Yaan, LiLin, CSR600 etc.
B. Port:
Select the communication port for the PTZ camera controlling (RS232/422/485)
C. Baud:
Select the baudrate according to baudrate of the PTZ camera.(150, 300, … ,
19200bps)
D. Address: Set the ID
according the ID of PTZ camera (0~254).
E. Pan Speed:
Set the pan speed of PTZ camera (0~63)
F. TiltSpeed:
Set the tilt speed of PTZ camera (0~63)
G. Set PS:
Setup preset position (0~128)
a. P/T/Z the camera to desired position
b. Press SET key to enter PTZ controller submenu
c. Move the yellow cursor to “Set PS” and then press
or
key to select the
preset position number.
d. Press ENTER key to complete preset position setting or preset RETURN key to give up
preset position setting.
Tips: Press
or
key to accelerate the value changing.
H. Go PS:
Call the preset position. (0~128) The PTZ camera will go to the desired preset
position.
a. Move the yellow cursor to “Go PS” and then press
or
key to select the preset
position number.
b. Press ENTER key to complete preset position calling or preset RETURN key to give up
preset position calling.
Tips: Press
or
key to accelerate the value changing.
The way of calling the OSD menu and preset of the PTZ camera may vary with control
systems from different manufacturers. Please read the operation manual of control system
manufacturer for details. The way of calling OSD provided for reference is calling preset-64.
a.
Move the yellow cursor to “PTZ controller” to enter PTZ controller mode