Pages from
Go
Video
Test-CCTV28
User Manual
www.allthings.com.au
Straight-through Line Cross Line Open Line or Short
Line
3.7. Data monitor
Capture the command data from RS485 controlling system.
a.
Connect the RS485 or RS232 interface of controlling system with the RS485 or RS232
interface of the Test-CCTV28 (In case of RS485, A to A, B to B)
b.
Press SET key and then press
or
key to select communication port according
to the system connection. Press SET key to save the change.
d.
Press
or
key to select the baud rate according to the baud rate of controlling
system and then press SET key to save the change and capture command data from
controlling system.
e.
Press RETURN key to clear the screen.
3.8 Device setting
Set the parameters of the Test-CCTV28
Auto power off: Setting the time of auto shut-down.(Disable,5,10,…,60)
Disable: Disable the “Auto power off” function. 5 means the CCTV will power off
after 5 minutes when there is no any operation.
Keypad tone: Open or close the beep of pressing keypad.
Language: Select language of OSD menu
Brightness: Setting the brightness of OSD menu and background.(0~7)