23
EN
2.17 Control of braking liquid level
Braking liquid level should be checked each
time before riding.
•
Position the vehicle on the center stand
•
Turn the handlebar to the left
•
Check the level on the sight-glass from
the right side of the vehicle - It must fi t
between upper and lower edge of the
sight-glass.
Absence of visible liquid in the sight-glass
means damage of braking system.
Scooter should not be used until the
braking system is repaired at the GOVECS
service station.
2.18 Control of belt tention
The belt tension should be 80-85 Hz which
can be measured with a standard Trummeter
for measuring belt tensions. Please contact
your service station for measurment and
tention adjustment.
Level
min – max
Sight-glass of the braking liquid level
Summary of Contents for GO! S1.2
