1.
Disconnects the power or take off the power plug.
2.
Exhaust method
A. Quick opening method
Slide the exhaust valve to the exhaust position until the float valve falls. (for non-fluid food)
Allow the pressure cooker to cool naturally until the float valve falls. (for non-fluid food)
B. General opening method
Have the pressure cooker to cool naturally, until the float valve falls.
3.
Open the cover
Hold the cover handle firmly, turn the cover clockwise to the spacing edge, and pull up the cover.
Do not open the cover until pressure inside the pot is released adequately .
Never pull out the exhaust valve when it is exhausting.
For fluid foods (porridge and sticky liquid), do not slide the exhaust valve for exhaust when
cooking is just finished, and otherwise the food will eject from the exhaust valve core. Be sure
to disconnect the power supply, have the unit cool naturally or put a wet towel around the cover
to speed up cooling until the float falls, and finally open the cover.
When large quantity food cooked, do not exhaust immediately after cooking. It is recommended
to open the cover and consume food once it is been in keep warm mode for some time.
Function Selection
General Functions
1. Finish cooking preparation according to Page 5
2. Switch on
The nixie tube flashes and displays a red horizontal
line “---”, indicating that the electric pressure cooker
has entered preparation state.
3. Select a required function level
5. After cooking, enter the warm-keep state automatically
Function key
Rice
Yogurt
Meat/Poultry
Soup
Bean/tendons
Multigrain
Cooking time (min) About 35
About 55
About 360
About 45
About 45
Within 10s, you can re-select preset time and function level, and finally confirm that the electric pressure
cooker will start work in 10s after selection.
The red horizontal line “---” on the display screen is bright, indicating that the electric pressure cooker has
entered working state.
During the operation, you can cancel current working state and return to standby state by pressing the
“Keep Warm/Cancel” key.
After cooking, a corresponding function indicator goes out, the warm indicator illuminates ,
the display screen shows “0.0”, and gives out the prompt sound (10 beeps), with the electric
pressure cooker going into warm state.
In standby mode, press the “Keep Warm/Cancel” key, the warm indicator illuminates , and gives
out the prompt sound (1 beep), indicating that the electric pressure cooker goes into warm state.
Once a function key is pressed, the indicator of a corresponding
function level will illuminate (red);
The rice congee function and cake function are only applicable
to products with such function.
Cooking time varies with different function level. The bigger the
food amount, the longer the cooking time. The cooking times listed in the table below are only for reference
(e.g. food water = 8 scales): Cooking time = heating time + holdup time
Warm Tips:
Safe Cover Opening
About 40
06
4. Select a function and within 10 seconds the cooker will perform the function corresponding to the selection
During any operational mode, press "keep
warm/ cancel" to return to standby mode.
A
"cluck" sound during use is not indicative
of a malfunction.
When cooking low amounts of food, removing
the cover may result in suction of the inner pot.
Manually shift the inner casing to remove it
