16
Use
ATTENTION!
❐
Burn hazard!
Never transport the device when in use.
❐
Burn hazard!
The heating plate, the frame and the food trays may be very hot dur-
ing and after use! If necessary, only take hold of the device by the handles. Use pot
holders when removing the food trays!
❐
Scalding hazard! Be careful when opening the lids during and after use. Hot steam
may be emitted!
❐
Do not use the device continuously for more than 6–8 hours.
❐
When you take the food trays out of the frame, be absolutely sure to set them on a
heat-resistant surface such as a trivet.
You can also use the heating plate without the food trays and the frame, e.g. to
keep plates warm. In this case, heat the device up for 10 minutes prior to use.
1. Place the device on a level, solid, dry and heat-resistant surface with adequate space
on all sides. If necessary, set a base under the device to prevent damage to the
surface.
2. Connect the device to a properly installed, easily accessible socket.
3. Fill the food trays.
4. Place the frame on the heating plate and the food trays in the frame. Close the food
trays with the lids.
5. Set the temperature control to the desired temperature (30–70 °C possi-
ble). The device starts the heating process and the control light is illuminated.
When the device has reached the set temperature, the control light goes out.
During use, the control light may turn on and off repeatedly. This is not a malfunction,
but indicates that the device is reheating to maintain a constant temperature.
6. After use, turn the temperature control OFF, pull the mains plug out of the socket and
let the device cool off completely before you remove and clean the food trays and lids
and stow them together with the device.
