EN
22
We therefore recommend regularly removing limescale deposits with a standard descal-
ing agent for coffee machines in accordance with the water quality in your area and how
often the device is used (approx. every 2 – 6 weeks).
The
fi
rst indications that descaling is required are a large amount of steam being pro-
duced and slower brewing of the coffee.
Storage
Disconnect the device from the mains power when it is not going to be used for a pro-
longed period. Clean the device again if necessary (see the “Cleaning and Care” chap-
ter) and let it dry completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals.
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the following steps, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
Possible cause
Fix
Nothing is shown on
the display (
15
).
The mains plug is not insert-
ed correctly in the socket.
Insert the mains plug.
The socket is defective.
No mains voltage is present.
Try another plug socket.
Check the fuse of the electri-
cal distributor (fuse box).
The display is defective.
Contact our customer service
department.
The fuse in the elec-
trical distributor (fuse
box) is triggered.
Too many devices connected
to the same circuit.
Reduce the number of devic-
es in the circuit.
Water runs out of the
device.
There is too much water in
the water tank (
3
).
Do not over
fi
ll the water tank!
The coffee runs very
slowly out of the cof-
fee outlet (
4
).
The coffee outlet is blocked.
Clean the coffee outlet.
The device is furred up.
Descale the device with a
standard descaling agent for
coffee machines.
