19
EN -
8.3 Electronic lock
This food processor has an electronic lock that is connected when the mixing bowl lid
5
or the deep steaming tray
3
are correctly installed. This is a safety function so the lid
cannot be opened easily when the blade
29
is turning.
- This lock is always activated when the appliance cooking program is in use.
- After the appliance stops, the lock still remains activated for 1-2 seconds.
- An audio signal sounds and the mixing bowl lid
34
or the deep steaming tray
3
can be opened.
- The higher the speed the longer the lock stays active, since the blade
29
and the
food keep turning longer.
8.4 Screen
•
The screen
26
shows all settings and operating values.
•
After approximately 5 minutes without any user interaction, the illumination of the
screen
26
goes into sleep mode. As soon as any button is pressed or a dial is turned,
the illumination of the screen
26
is switched on again for 5 minutes.
8.5 Setting the time
You can adjust the time in all modes.
1. Press the
TIME
button
21
to set the cooking time.
2. Turn the
SETTING
dial
20
clockwise to increase the time.
3. Turn the
SETTING
dial
20
counterclockwise to decrease the time.
- You can adjust the timer from 1 second to 90 minutes. The timer setting will count
up as follows:
From
To
Time unit
1 second
1 minute
In seconds
1 minute
10 minutes
In 30-second intervals
10 minutes
90 minutes
In minutes
- The time set is shown on the screen
26
.
- The time is counted down after the program has started in all modes.
- If no time and no temperature are specified, the time display will count up the time
from 0 seconds (00:00) to 90 minutes (90:00) while the blade is in operation. Then,
the appliance will be stopped automatically.
- During operation, the time can be adjusted.
- When the countdown is finished, the appliance stops.
- After several seconds, an audio signal sounds.
- The mixing bowl lid
34
can be opened.
- The timer can be used solely as a timer when the temperature or speed settings are
not set or in use.
