ON/OFF button flashes- other
buttons are not working.
All LED lightings are flashing
Steam is coming out of the
steam release hole.
Water is dripping out of the
drip tray.
Lots of hot water is coming
out of the drip tray.
Only steams comes out when
milk frothing.
The unit is under pre-heating
or standby mode
The unit is in power saving
mode
The unit is starting the cooling
system as the unit has worked
for continuous cycles.
The drip tray is full of water.
The screen filter is blocked.
There is a shortage of milk
or milk nozzle is not well
positioned.
Wait patiently until it finishes.
Press any button to re-start the unit.
Wait for the unit to cool down.
Empty the drip tray immediately.
Reduce the amount of ground coffee or
try a coarser ground coffee.
Refill the milk tank with enough milk
and check if the milk nozzle is in the
correct position.
PROBLEM
POSSIBLE CAUSE
SOLUTION
TROUBLESHOO
TING
13
