Device Description HG G-84300ZD | English, Revision 10 | Date: 01.06.2022
19
Configuration via USB – Chapter 5
Figure 10
Firmware Update – Choose file
If the status bar says
File correctly loaded
start the firmware update with
Upgrade
.
Figure 11
Firmware Update – Start update
If the update is successful the status bar says
Verify successful
. Then
leave DFU
mode
and quit the program.
Figure 12
Firmware Update – Leave DFU Mode
Afterwards the connection in the terminal program can be re-established. Then start
the monitor program again.
Use
Choose
to select the .dfu file
As shown the
DFU mode
has
to be active
Start the update with
Upgrade
.dfu correctly loades
Leave DFU mode
and
Quit
the program
Verify successful
shows
that the update was successful
