Device Description HG G-19603ZA | English, Revision 03 | Date: 31.03.2021
11
Mounting – Chapter 3
3
Mounting
3.1 Magnetic Tape
For the operation of the magnet sensor HG G-19603ZA axially polarized magnetic
band is to be used. The direction of the polarization can be configured s. Figure 20
on page 28). The polarization has to be identical for a whole facility.
Figure 5
Supported and unsupported magnetization of the magnetic tape
3.1.1 Magnetic Tape Types
Götting offers suitable magnetic tapes. Magnetic tape is sticked to the ground. Alter
-
natively embedded magnetic bar can be used that is layed in a groove cut into the
ground. Götting magnetic tapes always have the north pole on the top. The following
elements are available:
Table 2
Order numbers magnetic tape
Order no.
Description
Notes
HW MAT00003 Magnetic tape, self-adhesive, on a roll
W x H 50 x approx. 1,2 mm
Roll, length 15.2 m
HW MAT00004 Embedded magnetic bar,
W X H 6 x 10 mm
quote length
HW MAT00005 Magnetic tape, self-adhesive curve seg
-
ment
30
o
segment of circle, radius 600 mm
Curve segments
HW MAT00006 Magnetic tape, self-adhesive curve seg
-
ment
30
o
segment of circle, radius 800 mm
HW MAT00007 Magnetic tape, self-adhesive curve seg
-
ment
30
o
segment of circle, radius 1,000 mm
HW MAT00008 Magnetic junction, branch to the right,
self-adhesive, radius 1,000 mm
Junction segments
HW MAT00009 Magnetic junction, branch to the left, self-
adhesive, radius 1,000 mm
(default)
(configurable)
multipolar magnetization
axial magnetization
axial magnetization
not OK
