5. Fit the lid (5) on the bowl (1) and turn it right in position so it locks into the
main body.
6. Place the pulp container (7) so that it fits in position on the left hand side of
the juicer's main body.
7. Place the juice cup (8) under the juicer spout.
FOOD PREPARATION
•
Remove stones (plums, peaches, cherries etc).
•
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
•
Soft-skinned and other foods just need washing.
•
Cut the food into smaller pieces to fit the feed tube.
USING THE DEVICE
•
Switch on, put some fruits and vegetables into the feeder and push down
with the pusher.
•
Use reverse (R) function only when food get stuck.
•
Do not turn the switch quickly from ON to R, but wait a few seconds in
the OFF position.
•
Some very hard foods may make your juicer slow down or stop.
•
If this happens switch off and unblock the filter.
•
Insert soft food slowly to get the most juice.
•
Some fruits and vegetables may block filter during work which cause
decrease of the juicing efficiency.
•
If you observe that during work, efficiency is getting to low, cleaning of
filter is needed.
CLEANING AND MAINTENANCE
•
For easy cleaning - immediately after each use rinse removable parts
under running wate.
•
After disassembling the unit all removable parts may be washed in hot
soapy water.
•
The lid, bowl, pulp container, juice cup are dishwasher safe.
•
Wipe the motor base with a damp cloth.
•
Always treat the filter (3) with care as it can be easily damaged.
•
If pulp is left to dry on the filter it may clog the fine pores of the filter
mesh thereby lessening the effectiveness of the juicer.
10
