Gotharman deMOON, User Manual

Page: 14 / 38

14
Edit 1 – Tempo:
Adjusts the tempo of the sequence, unless sync in the midi section is set to ”ext”.
Edit 2 – Last Step:
Sets the number steps the sequencer will run thru. Value can be from 1 to 32.
Encoder – Start Step: Selects at what step the sequencer will start, when you hit the Play/enter
knob, or jumps from another sequence to this one.
Edit 2 – Key transpose:
If on, received midi note-on’s will transpose the entire sequence in semi-
tones in real-time.
Encoder – Key trigger: Selectable modes:
-Off : The sequencer are in normal mode. When you hit the Play/Enter
knob, it starts running, and when you hit it again, it stops.
-Gate : When you hit the Play/Enter knob, the sequencer starts running,
but you can’t hear it. A midi note-on from an external midi device (on
deMOON’s midi ch) will gate the sequencer, and cause it to output the
track data.
-Rgat : Same as gate, except that every time a midi note-on are received,
the sequence will reset to the start step.
-Key : Every time a midi note-on are received, the sequencer advance to
the next step, and plays that step, until a note-off are received. This
mode ignores the tempo and clock int/ext settings.