Gotharman deMOON, User Manual

Page: 10 / 38

10
The pattern/sound select page
This is the deMOON main page. Every time you turn on your deMOON, it will for a short while
write: ”Gotharman’s deMoon”, and right after that, it will go to this screen.
On the top of the display it writes the name of the selected pattern/sound. It remembers what pattern
was selected, when it was turned off, and goes to that pattern when it is turned on again.
On the bottom of the display it writes the selected pattern bank and number. The deMOON has
eight banks (A-H) with each 16 sounds (128 in all). The number shown in paranthes, are the midi
program change number you will have to transmit to the deMOON, to select this pattern, from an
external midi-device.
To change pattern: If the cursor is not blinking, push the cursor(click)value encoder, to make the
cursor blink. Rotate the cursor(click)value encoder in either direction to place the cursor under the
letter, if you want to change the bank number, or the number if you want to change the pattern
number. Push the cursor(click)value encoder, so the cursor is not blinking. Rotate the
cursor(click)value encoder to select the pattern you want. It will write the pattern name on the top of
the display. The play/enter knob will now start to blink. Push the play/enter knob to confirm change
to the selected pattern.