9 10
GW500
Service
with the 4 Bars lights
off
Limited or no service, searching for
service, IMS registration failed.
Network solid red with
the 4 Bars lights off
No SIM or SIM error
Network icon and 4Bars
solid green
Signal strength indicator, weak to
strong signal
1.5
Device Installation
The GW500 works with your wireless service provider’s cellular network
instead of your home’s phone jacks.
Position your GW500 in a location that has a strong signal, typically near a
window wall.
Connect the two antennas to the position of
the
antenna interface.
Insert the nano SIM card into the SIM card port in the direction as shown in
the figure below.
2.
Using Your GW500
2.1
Power O
N
or O
FF
•
To power on your GW500, slide the Power Switch
to the ON position.
•
To power OFF, slide the Power Switch to the OFF position.
Note: When powered off, the GW500 will not send or receive calls.
2.2
Connect Your GW500 to a Phone
Using a phone cable (RJ11, not included), connect your home phone to the
Port nam
ed
PHONE 1
Note: The PHONE 2 port can be used to connect an additional phone or
cordless base station. All telephones connected to the GW500 will share the
same telephone number.
2.3
Phone Calls
Place a Call by Dialing
