background image

 

 

7                                                                                                                                                                                                                                                  8 

GW500

 

 

1.2

 

Install Your Battery 

1.

 

With the back cover facing upright, and slide your top hand down to 

remove the back cover. 

2.

 

Insert the battery by aligning the metal contacts on the battery with the 

metal contacts in the battery compartment. Gently push down on the 

battery until it clicks into place. 

 

3.

 

Install the back cover. 

 

1.3

 

Charge Your Battery 

1.

 

Connect the adapter(included) to the power socket on the GW500. Do 

not force the connector into the power socket. 

2.

 

Connect the charger to a standard AC power outlet. 

 

1.4

 

Status Indicators 

The indicator lights show the device’s status. 

Indicator 

Status 

Description 

Power 

Solid Green   

The device is Power on 

Blinking Green   

The device is Shutting down 

Light off 

The device is Power off 

Voicemail 

Blinking Green   

New voicemail waiting 

Light off 

No new voicemail 

Information 

Blinking Green rapidly 

Waiting for update 

Solid Green 

Software update is in process 

Blinking Green slowly   

Software update success 

Blinking Red   

Software Update end failed 

Battery 

Solid Green   

High. Battery level ≥50% 

Blinking Green 

High (charging) 

Solid Yellow   

Medium .20%≤Battery level

50% 

Blinking Yellow 

Medium(charging) 

Solid Red   

Low. Battery level

20% 

Blinking Red   

Low(charging) 

Light off 

No battery installed 

Network blinking red 

Device is not working normally, i.e. 

Summary of Contents for GW500












Reviews: