10
GMC-I Messtechnik GmbH
Request menu
Press 1x
Selection and execution of the functions
listed in the menu is done by means of the
corresponding keys on the test instrument.
The other operating controls and connectors
should remain unchanged while the SI mod-
ule is active so that the data traffic will not be
disturbed.
The menu item "Return" causes a return to the LC display presented
prior to activating the SI module.
The display
shows that 10 % of the storage capacity are already
occupied. When 99% of the memory are filled, the data should be
transmitted to a PC and stored there. Subsequently, the existing data
must be deleted before new data can be stored to memory. Otherwise,
the messages „Memory full“ and „Clear memory in setup“ appear.
4
Presettings
Upon selection of the menu item „Setup“
you can perform the following settings:
4.1
Setting the Clock
Note:
Please ensure that the same date and time
are set in the connected test instrument.
MENU
10%