4
GMC-I Messtechnik GmbH
1
Safety Features and Precautions
This instrument fulfills the requirements of the applicable
European and national EC guidelines. We confirm this with
the CE marking. The relevant declaration of conformity can
be obtained from GMC-I Messtechnik GmbH.
The analog multimeter METRAmax 6 is manufactured in
accordance with safety regulations IEC 61010-1/EN
61010-1/VDE 0411-1. When used for its intended pur-
pose, the safety of the operator, as well as that of the
instrument, is assured. Their safety is however not guaran-
teed if the instrument is used improperly or handled care-
lessly. It is therefore imperative that you read the operating
instructions thoroughly and carefully before placing the
METRAmax 6 into service, and that you follow all instruc-
tions contained therein.
Observe the following safety precautions:
•
The instrument may only be operated by persons who
are capable of recognizing contact hazards and taking
the appropriate safety precautions.
•
Contact hazards exist anywhere, where voltages of
greater than 30 V may occur (effective value).
•
Be prepared for the occurrence of unexpected voltages
at devices under test (e.g. defective devices).
For example, capacitors can be dangerously charged!
•
Housing and measurement cables may not be dam-
aged, e.g. by cracks or ruptures.
•
No measurements may be made with the METRAmax 6 in
electrical circuits with corona discharge (high-voltage).
•
Special care is required when measurements are made
in HF electrical circuits. Dangerous pulsating voltages
may be present.
