72
GMC-I Messtechnik GmbH
Accessories
11
Accessories (Standard Equipment See Page 2)
11.1 General
The extensive accessories available for our measuring
instruments are checked for compliance with currently valid safety
regulations at regular intervals, and are expanded as required for
new applications. Currently up-to-date accessories which are
suitable for your measuring instrument are listed at the following
web address along with photo, order number, description and,
depending upon the scope of the respective accessory, data
sheet and operating instructions: www.gossenmetrawatt.de
(
Products
Measuring Technology – Portable
Digital Multimeters
METRA
HIT
...
Multimeter Accessories).
11.2 Technical Data for Measurement Cables
(scope of delivery: KS21-T safety cable set)
Electrical Safety
Please observe the maximum values of the electrical safety of the
device.
Ambient Conditions (EN 61010-031)
Temperature
–20
C ... + 50
C
Relative humidity
50 to 80%
Fouling factor
2
Application KS21-T
Attention!
!
In conformity with standard DIN EN 61010-031, mea-
surements in an environment according to measuring
category III may only be performed with the safety cap
applied to the test probe of the measurement cable.
For establishing contact in 4 mm jacks you have to remove the
safety cap by levering out the snap lock of the safety cap with an-
other sharp object (e.g. the second test probe).
11.3 Power Pack NA X-TRA
Use only power packs from GMC-I Messtechnik GmbH only in
combination with your instrument. This assures operator safety by
means of an extremely well insulated cable, and safe electrical
isolation (nominal secondary ratings: 5 V / 600 mA).
Installed batteries are disconnected electronically if the power
pack is used, and need not be removed from the instrument.
Maximum Rated Voltage
1000 V 1000 V
Measuring Category
CAT III CAT II
Maximum Rated Current
1 A
16 A
with safety cap applied
—
without safety cap applied
—
Summary of Contents for METRAHIT T-COM PLUS
Page 5: ...GMC I Messtechnik GmbH 5 Standard Equipment Contact Persons ...
Page 11: ...GMC I Messtechnik GmbH 11 Safety Warnings ...
Page 25: ...GMC I Messtechnik GmbH 25 Control Functions ...
Page 41: ...GMC I Messtechnik GmbH 41 Measurements V Hz Temp m A Hz ...