Goscam 8217KP, User Manual, Page: 6 / 9

09 10
Delete camera
Vox mode
1. Select Alarm Settings, press OK to enter the settings page.
2. Select
“ ”
as needed and press OK to confirm.
( 1) Low sensitivity: infants need to make a lot of sounds before using VOX function,
which will be activated. High sensitivity: The baby does not need to make many
sounds to activate the VOX function.
(2) Sound switch button: Enable VOX function; Select any sound sensitivity button.
When VOX level is activated, press “OK”. If the following page is displayed, the
Settings are saved successfully. After the monitoring is complete, press” ” to
return to the monitoring page. - When VOX is OFF: Select the "OFF" button to turn
OFF VOX. The baby's voice will be transmitted as audio to themonitor only, unless
the sound switch button is pressed again.
For example, when the sound switch is turned on, after selecting the required VOX
to wake up the sound sensitivity, the sound icon will appear on the page, and the
indicator light will blink when the alarm is raised. When the sound switch is turned
off, the sound icon will not appear on the page.
2. Select the channel to be deleted, and press OK to confirm. Then select “ Delete Camera ”
and press OK to confirm.
Note : 1. Select Camera, and press OK to enter the function.
VOX mode allows you to control the sound activation of your baby unit, and can also
saves the battery life of parent unit. If there is no sound around the baby unit within
30 seconds, it will stop audio transmission and turn off the screen of the parent unit.
When the baby unit detects any sounds louder than the sensitivity level, it will start
transmitting the signal of the parent unit again and turn on the screen of the parent
unit.
1
2
OFF
ON OFF
↩
Temperature alarm settings
When it is too hot or too cold in your baby ' s room, the temperature alarm will push a
notification to your receiver.
1. Select Alarm Settings, press OK to enter the settings page, and
select
“ Temperature Alarm ” settings.
2. Select “ Celsius, Fahrenheit ” as needed and press OK to confirm.
3. Select “ Alarm ” “ ON, OFF ” as needed.
ON OFF
°
C
°
F
≤
84 57
≥
OFF