Goscam 8217KP User Manual Download Page 3

03

04

27

Signal strength between the receiver and the camera

No signal connection between the receiver and the camera

The Lullaby function is enabled. 

Displaying current room temperature

Show current battery level

Temperature alarm has been turned on

No camera is added or the camera is disconnected from receiver

Audio alarm

Temperature alarm reminder

Message push icon

Feed reminder has been turned on

 

VOX wake up function is enabled 

Feed alarm reminder

Low battery alarm reminder

Message push icon

Explanation for status indicator LED

The red light goes on when charging and off when charging/not charging 

Using the Monitor

Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the 
camera lens toward the area you want to monitor.

NOTE:

Do not place the Monitor Unit within baby's reach. If there is interference with the 
picture or sound, try moving the units to different locations, and ensure they are 
not close to other electrical equipment.

Children have STRANGLED in cords.
Keep this cord out of the reach of children
(more than 3feet(0.9m) away).
Never use extension cords with AC 
Adapters.Only use the AC Adapters 
provided.

Mute icon, status bar appears when receiver sound is set to mute 

Summary of Contents for 8217KP










Reviews: