manualshive.com logo in svg

Gorilla Playsets Blue Ridge Mountaineer, Assembly Manual, Page: 47 / 79

Share
Download
Gorilla Playsets Blue Ridge Mountaineer Assembly Manual Download Page 47

STEP 18:  PA NEL SLA TS/ TIC  TA C  TO E PA NEL

1:  FIND TW ENTY-O NE 5/ 4 X 2-5/ 8 X 28-1/ 2" PA NEL SLA TS.

2:  PRE-DRILL THE SLA TS 1" FRO M EA C H END O N C ENTER W ITH A  1/ 8" DRILL BIT.

3:  INSTA LL THE PA NEL SLA TS A T EQ UA L LENG THS.

4:  A TTA C H THE PA NEL SLA TS TO  THE FO RT W ITH 2" W O O D SC REW S IN THE PRE-DRILLED HO LES.  

5:  C ENTER THE 1-3/ 4 X 1-1/ 2 X 10-3/ 4" BLO C K BETW EEN THE PA NEL SLA TS O N THE BA C K W A LL, 4" FRO M  THE DEC K, 
A ND A TTA C H W ITH 2" W O O D SC REW S.

6:  PLA C E THE TIC -TA C -TO E PA NEL O N THE PREVIO USLY INSTA LLED BO A RD, A ND THEN PLA C E THE O THER 1-3/ 4 X 
1-1/ 2 X 10-3/ 4" BLO C K A T THE TO P O F THE TIC -TA C -TO E PA NEL.  

7:  W ITH A  PENC IL, MA KE A  MA RK A T THE TO P O F THE BO A RD A ND SET THE A SSEMBLY A SIDE.

8:  PLA C E THE TIC -TA C -TO E PA NEL BLO C K BA C K A T THE MA RK THA T W A S PREVIO USLY MA DE, A ND A TTA C H IT 
W ITH 2" W O O D SC REW S.

9:  A SSEMBLE THE TIC -TA C -TO E PA NEL USING  THE INSTRUC TIO NS PRO VIDED.  PLA C E THE TIC -TA C -TO E PA NEL O N 
THE INSTA LLED BLO C KS, A ND A TTA C H IT TO  THE PA NEL SLA TS W ITH THE PRO VIDED W O O D SC REW S.

NO TE:  THERE W ILL BE PA NEL SLA TS LEFT O VER.

2" W O O D
SC REW

5/ 4 X 2-5/ 8 X 28"

PA NEL SLA T

Summary of Contents for Blue Ridge Mountaineer
















































































Reviews:

No comments