BOLT
RIGHT ARMREST
1/4" NUT
LEFT ARMREST
ASSEMBLY
ASSEMBLY
1/4" WASHER
1/4" X 3"
CARRIAGE
SEAT BACK
1/4" LOCK WASHER
STEP 3: ARMREST ASSEMBLIES TO SEAT BACK
1: LINE UP THE END HOLE IN THE ARMREST WITH THE MIDDLE HOLE IN THE SEAT BACK.
2: PLACE A CARRIAGE BOLT INTO THE END HOLE OF THE ARMREST AND SET IT WITH A
HAMMER.
3: FASTEN THE ARMREST TO THE SEAT BACK WITH A 1/4" WASHER, A 1/4" LOCK WASHER
AND A 1/4" NUT*.
* IF FOR SOME REASON THE CARRIAGE BOLT SPINS IN THE HOLE USE A PAIR OF LOCKING
PLIERS (VISE GRIPS) TO HOLD THE HEAD OF THE CARRIAGE BOLT WHEN TIGHTENING THE
NUT.
14
