STEP 1: SEAT TO BACK ASSEMBLY
1: LINE UP THE HOLES IN THE BACK WITH THE HOLES IN THE SEAT.
2: PLACE A 1/4" X 2" CARRIAGE BOLT INTO EACH HOLE AND SET IT WITH A HAMMER.
3: FASTEN THE BACK TO THE SEAT WITH 1/4" WASHERS, 1/4" LOCK WASHERS AND 1/4"
NUTS. USE THE SMALL PLASTIC CAPS INCLUDED TO COVER THE EXPOSED THREADS ON
THE ENDS OF THE CARRIAGE BOLTS.
*IF FOR SOME REASON THE CARRIAGE BOLTS SPIN IN THE HOLES USE A PAIR OF LOCKING
PLIERS (VISE GRIPS) TO HOLD THE HEAD OF THE CARRIAGE BOLT WHILE TIGHTENING THE
NUTS.
WASHER
NUT
IN EACH SIDE)
PLASTIC CAP
1/4"
BACK
(HAS FOUR HOLES
IN EACH SIDE)
SEAT
(HAS THREE HOLES
CARRIAGE
BOLT
1/4"
1/4" X 2"
1/4"
LOCK WASHER
12
