STEP 2: ARMREST ASSEMBLIES
1: LINE UP THE SMALL HOLE IN EACH ARMREST WITH THE SMALL HOLE IN THE ARMREST
SUPPORT.
2: PLACE A 1/4" X 3" CARRIAGE BOLT INTO THE HOLE IN THE ARMREST AND SET IT WITH A
HAMMER.
3: FASTEN THE ARMREST TO THE ARMREST SUPPORT WITH 1/4" WASHERS, 1/4" LOCK
WASHERS AND 1/4" NUTS. YOU WILL HAVE TO USE A 7/16" BOX END WRENCH IN THE BIG
HOLE OF THE ARMREST SUPPORT TO TIGHTEN THE NUTS*.
4: PLACE A PLASTIC CAP OVER THE END OF THE EXPOSED THREADS ON THE END OF THE
CARRIAGE BOLT.
* IF FOR SOME REASON THE CARRIAGE BOLTS SPIN IN THE HOLES USE A PAIR OF LOCKING
PLIERS (VISE GRIPS) TO HOLD THE HEAD OF THE CARRIAGE BOLT WHILE TIGHTENING THE
NUTS.
BOLT
1/4" LOCK WASHER
ARMREST
ARMREST
ARMREST
ARMREST
SUPPORT
1/4" WASHER
SUPPORT
1/4" NUT
THIS WILL BE THE RIGHT ARMREST ASSEMBLY
THIS WILL BE THE LEFT ARMREST ASSEMBLY
1/4" X 3"
CARRIAGE
1/4" PLASTIC CAP
13
