IMPORTANT SAFETY INSTRUCTIONS
1.
READ ALL INSTRUCTIONS CAREFULLY BEFORE USE.
If you do not understand these instructions, need
clarification or further explanation, please call our toll free answer line for assistance at
1-800-867-6763
Monday through Friday 8:00 a.m. until 5:00 p.m. CST.
2.
Do not load cart with more than 1,200 lbs. (544kg)
3.
Do not allow children to use the cart unsupervised. This cart is not a toy.
4.
Always distribute payload evenly over surface of cart.
5.
If any parts become damaged, broken or misplaced, do not use the cart until
replacement parts can be obtained.
6.
Do not operate or use on objects that can cause damage to the pneumatic tires or tubes.
Do not inflate tires more than 30 psi.
7.
SAVE THESE INSTRUCTIONS.
ASSEMBLY INSTRUCTIONS
Your cart requires assembly. Account for all parts and hardware before beginning assembly. If any parts are missing,
damaged, or if you have questions or need additional instructions,
DO NOT RETURN THIS
PRODUCT TO THE RETAILER,
call the manufacturer at
1-800-867-6763
Tools required for assembly: Medium size slot screwdriver, 6, 8, and 12mm open end wrench and /or two medium
adjustable wrenches.
Refer to the exploded drawing and the parts list on the following pages during assembly.
S
Stte
ep
p 1
1
Assemble the Rear Axle Support to the Frame
Support using (4) 6x16mm frame support bolts and
6mm lock nuts. Tighten all bolts and lock nuts
securely.
S
Stte
ep
p 2
2
The Front Axle Support is mostly pre-assembled
at the factory. Please make sure that all of the bolts and
lock nuts assembled at the factory are tight.
A. Insert the two remaining 8x15mm shoulder bolts into each
end of the Steering Link Connector. Apply 6mm washers and
6mm lock nuts and tighten securely.
B. Attach the Front Axle Support to the Frame Support using
(4) 6x16mm frame support bolts and 6mm lock nuts.
C. Secure the Center Front Axle Brace to the Frame Support
using (2) 8x20mm frame support bolts, 8mm washers and
lock nuts.
