S
Stte
ep
p 3
3
Attach the Frame Support to the Bed using (4) 8x15mm
frame support bolts, 8mm washers, and lock nuts. Tighten
securely.
S
Stte
ep
p 4
4
Assemble the wheels using bushings (4pcs.), washers
(4pcs.), and locking nuts (4pcs.).
Tighten all nuts securely.
S
Stte
ep
p 5
5
Attach the Swivel Handle to the Yoke and the Plastic
Coupling using the 8x60mm bolt, 8mm washer and lock nut.
S
Stte
ep
p 6
6
The Lock Handles are pre-assembled onto the Panels at
the factory. NOTE: Do not tighten the lock nuts on the
Lock Handles until the end of this step.
Attach the Front, Back, and
(2) Side Panels onto the Bed using the Fence Assembly
Pins. Latch the Front and Back Panels to the Side Panels
using the Lock Handles. Once all panels are locked
together in the upright position, tighten the 8mm lock nuts
on the Lock Handles for smooth operation without being
overly tight.
S
Stte
ep
p 8
8
Install the Plastic Tray into the bottom of the Base.
Swivel Handle Instructions
Step 1
Remove clips and cotter pins.
Step 2
Rotate the handle and
insert cotter pin.
Secure by attaching the clip.
Step 3
The second cotter pin
is used to attach the
handle to the trailer hitch.
