Gorgy Timing LEDI NETWORK DCLS, User Manual

Page: 76 / 128

76 MDE-LEDInetworkITS-server-4078V1.3
1.3.3. The NTP software
A/ NTP client software states
Here are the different states of the NTP client software:
Here is a description of these states:
► Starting:
The software is starting, it initializes and check the hardware if needed.
► auto-detection :
Server auto-detection is activated. The NTP client tries to find Gorgy Timing ser -
vers. At least one detected server is required to leave this state.
► Learning :
The NTP client software has found one or several Gorgy Timing (auto-detection ac-
tivated) or works with configured servers. In this state, the software learns network
properties. About 2 minutes are required to complete this stage.
► Tracking :
Normal behavior, the NTP client permanently evaluate its offset and drift with the
server.
► Commuting :
Not enough reply received from current server, trying another server.
Starng
Auto-detecon
Learning
Tracking Commung
Learning
environment
Searching servers
Enable outputs
No reply
Commutaon OK
Learning
environment
1. INTRODUCTION