Gorgon G3O3
LEVEL 8 – Shock sensor sensitivity adjustment.
Sublevel 8.1 - adjustment of a built-in shock sensor’s operation threshold by a warning level.
During the sensor’s threshold of sensitivity adjustment the LED blinks with red and green light. At this,
the higher the sensor’s sensitivity, the more green light is available on the LED. All in all, the sensor has
got 256 gradations of sensitivity. Each pressing of the remote’s button “1” decreases sensitivity per one
gradation; each pressing of the button “2” increases it. At the up most sensitivity level the system produces
a triple sonic signal while the LED goes down. At the low-level of sensitivity that corresponds to this level
deactivation the system also produces a triple sonic signal while the LED is shining with red light.
During the adjustment an actual sensitivity of the sensor can be verified. At that, the sensor’s trigger-
ing will be followed by a single signal of the siren.
At the “VALET” button pressing the system stores a current setting and goes to the next level.
Sublevel 8.2 - adjustment of a built-in shock sensor’s operation threshold by alert level.
This adjustment is identical to the setting described in Sublevel 8.1. At the “VALET” button pressing
the system stores a current setting and is waiting for a new level number entry.
At the moment of sensitivity adjustment the main block (unit) with a built-in
shock sensor should be already installed and fixed in the vehicle to provide
precision of adjustment. Do not set a very high level of sensitivity otherwise it
may cause false triggering of the system.
STORAGE AND TRANSPORTATION
The alarm systems, packed according to the required norms, should be stored at the environmental
temperature of 1 to 40
0
C at relative humidity of 80% (rated at 25
0
C). The indoor air must not contain
acidity or alkali vapors which cause corrosion.
Warranty shelf life is 6 months.
The alarm system packed in shipper container can be transported by motor or railway transport in
house cars or containers as well as by air or water transport in waterproof isothermal compartments or
holds for any distance and at any speed. Transportation should be performed in accordance with the
regulations and rules applicable to the respective type of transport.
All the warning writings on the package should be strictly followed during loading and transporta-
tion.
Summary of Contents for G303
Page 1: ...Gorgon G3O3...
Page 16: ...16 Gorgon G3O3 Made in Russia...
