hinge cover.
•
Press and snap the hinge cover into place.
•
Snap the screw hole cover into place on the
opposite side.
Parts Included:
•
Top left case hing
•
Bottom left case hinge
•
No cap on the upper right hinge
•
Key TORX No. 25
Tools Needed:
•
Phillips Screwdriver
•
Electric drill
Remove the door:
•
Remove the 2 screws and the toekick. Set aside
the screws and toekick for
fi
nal installation.
•
Remove 3 screws from the upper hinge with the
attached key.
•
Remove the decorative cover (unscrew 3 screws
at the back, and 2 screws in the front).
•
Lift off the hinge (screws will be used to install the
new hinge).
•
Lift the door off the bottom case hinge.
•
Remove the bottom case hinge pin and bracket.
Rotate the door:
•
The handle will be on right side of the door,
hinges will be installed on the left side of the case.
•
Remove the door stop and cam riser on the
original bottom right side of the door.
•
Turn the door.
20
Reverse door swing
- appliances with
decorative cover
