SPECIFICATION SUBJECT TO CHANGE
WITHOUT NOTICE.
Reinstall the Door:
•
Install the original door stop and cam riser onto
the bottom left side of the door.
•
Install the new supplied bottom case hinge pin
and bracket onto bottom left side.
•
Place the door onto the bottom case hinge.
•
Fasten the upper left hinge with a cap out of the
set, with the three original screws. Fasten the
attached hinge without a cap at the top right hand
side.
•
Replace the decorative cover and screw it down.
Check to be sure screws are tight and that
the door is straight and does not sag. The
door should swing freely.
The toekick has a cutout on the left and right sides.
Remove the plug on the left side and reinstall on the
right side. If you choose to install the stainless steel
toekick, reinstall the plug on the right side of that
toekick.
•
Install original screws and spacers or screws and
spacers supplied with the stainless steel toekick.
Install screws through the spacer standoff, toekick
and into the base as shown.
Instructions for use of the appliance can also be
found on our website at www.gorenje.com / < http://
www.gorenje.com />
21
Install Toekick
