60
Water inlet filters
Filters are in place to prevent dirt and foreign
substances in the water from entering the machine
and can be found both on the tap side of the inlet
hose and on the ends of water valves along the
water inlet hose of your machine.
If your machine cannot take in a sufficient amount of
water despite the water tap being open, these filters
should be cleaned.
(It is recommended that you clean your water inlet
once every 2 months.)
• Detach both ends of the water inlet hose.
•
Remove the filter on the water inlet valves using
pliers and then clean it using a brush and water.
•
Disassemble the filter on the tap side of the
water inlet hose manually and clean it.
•
Once the filters are cleaned, put them correctly
back in place.
CAUTION:
The filters of water inlet valves may be clogged
due to a contaminated water tap or the lack of
necessary maintenance or valves may be broken
down, causing continuous water leakage into your
machine.
The breakdowns that may arise due to these
reasons are out of the scope of warranty.
