Gorenje WCIU2090A1, Detailed Instructions For Use

Page: 30 / 60

30
Gorenje, d.o.o.
Partizanska 12
SI - 3320 Velenje, Slovenija
info@gorenje.com
www.gorenje.com
8. Adjust the wine cooler feet so that you achieve the desired height for the
cooler. If needed, re-attach the extendable plinth section with the four
screws that were removed in step 2. Stand the wine cooler up steadily - if
the extendable section will foul the floor or similar, remove it. Allow the wine
cooler to stand for 24 hours before plugging it in. This will help to prevent
damage to the system.
Adjusting the plinth
The plinth/grille for this appliance comes with an adjustable section.
The process for adjusting the plinth trim is simple and is achieved by
following the steps below. Perform these steps once the appliance is
standing on all four feet and do not put weight on the plinth.
1. Loosen the two screws on each side of the plinth trim (four altogether -
Fig. 17).
2. Carefully guide the front trim down until the desired height is achieved.
Tighten the screws.
Fig. 17