Gorenje WCIU2090A1, Detailed Instructions For Use

Page: 17 / 60

17
This appliance has two options for the temperature display. One option shows
the set or target temperature in the wine cooler. The other option shows
the real temperature within the wine cooler, and can be useful for actively
monitoring the wine cooler's behaviour. Descriptions and further information on
these display options are shown below.
Set temperature display
• The temperature display will show the set temperature (the temperature that
the cooler is working to achieve).
• A decimal point '.' next to the temperature signifies that the wine cooler is
working to achieve the set temperature.
When the decimal point disappears,
or if it is not present, the cooler's sensor has detected that the set temperature
has been reached. Themdecimal point may reappear periodically when the
cooling system kicks in to maintain the temperature.
• The display flashes when temperature adjustment is active or a different
temperature is being set.
Real temperature display
• The temperature display will show the real or actual temperature within the
wine cooler.
•
A decimal point '.' next to the temperature signifies that the wine cooler is
working to achieve the set temperature. When the decimal point disappears,
or if it is not present, the cooler's sensor has detected that the set temperature
has been reached. Them decimal point may reappear periodically when the
cooling system kicks in to maintain the temperature.
• The display flashes when temperature adjustment is active or a different
temperature is being set.
TEMPERATURE DISPLAY
To change the temperature display
•
The control panel must be locked (see page 14).
• Touch and hold the light button B and the button D for
approximately 2 seconds.
• The display will show '02' or '01', depending upon which
display setting has been active.
• Use the button D to switch between '02' and '01'. '02' is the Set temperature
display mode and '01' is the Real temperature display mode. Once the mode
you desire is shown on the display, touch nothing for approximately 5 seconds.
The appliance should beep and switch to the new display mode.