Gorenje VS 120 E, Instruction Manual

Page: 52 / 182

- 50 -
3. Open the appliance cover. Connect one end of the hose to the air
intake in the vacuum chamber area and fit the other end of the hose
into the center hole of the food container cover. Make sure the food
container cover knob
is turned to “SEAL” position – Fig. 1&2.
4. Press the food container switch (just
above the air intake) to start vacuuming
–
Fig. 3. To ensure there is no leaking of air
between the cover and the food container,
use your hand to push down the cover
knob at the beginning of the vacuuming
process.
The appliance will stop
automatically when enough vacuum
pressure is achieved.
5. Please press the food container cover steady when you pull off the
hose accessory, press the release button to open the cover.
Opening the food container after vacuum packaging
To open the food container, release the air first by turning the knob
switch from "Seal" to "open" position.
Note:

Make sure the food container cover knob is turned to SEAL position
before vacuuming.

At the beginning of the vacuuming process in a vacuum food
container, slightly press down on the food container cover or on the
hose adaptor for a few seconds to make sure the hose is attached
tightly and to avoid air leaking through the gap between the cover
and the food container top rim.

To test the vacuum and seal, simply tug on the cover. It should not
move.
Note:
After finishing the vacuum packing, please always leave
the appliance cover open. Do not fasten the cover as this
will deform the foam gaskets and affect the appliance
function.
Fig.3