Gorenje TC 400, Instructions For Use Manual

Page: 40 / 72

40
Dear customer, thank you for purchasing our product.
PLEASE READ THE INSTRUCTIONS CAREFULLY PRIOR TO THE
INSTALLATION AND FIRST USE OF THE WATER HEATER WITH HEATING
PUMP.
The water heater with heating pump has been manufactured in compliance with
the relevant standards and tested by the relevant authorities as indicated by the
safety certificate and the electromagnetic compliance certificate. Basic technical
characteristics of the product are listed on the label attached to the protective
cover.
The installation of the water heater with heating pump must be carried out by qualified
staff only. All repairs and maintenance work in the interior of the water heater as
well as limestone removal or testing/replacement of the corrosion protection anode
may only be carried out by an approved maintenance service provider. Please take
into account instructions for safe operation and measures in case of malfunctions.
The water heater has been manufactured so as to allow alternative sources of
energy besides electricity to be used, as follows:
- central heating hot-water system
- solar power
This version of heating pump is used for heating the consumption water for
households and other consumers, where daily consumption of hot water (50
°C) never exceeds 600 to 900 l. During the operation of the heating pump the
temperature of the ambient (usually the cellar) is reduced, hence the double effect
of the heating pump: heating of hot water – cooling of the room. The operation of
the heating pump is fully automated.
This is a compact version of the heating pump, incorporating compressor and
evaporator installed either on the side of the hot water tank (TČ 400-2/S, TČ 500-
2/S).
TECHNICAL CHARACTERISTICS THE WATER HEATER WITH
HEATING PUMP
TČ 400-2/S TČ 500-2/S
Heater volume [ l ] 385 500
Total mass [ kg ] 190 205
Rated pressure [ MPa ] 1
PT heated surface – lower [ m
2
] 1,8 2
PT heated surface – upper [ m
2
] 1
PT volume – lower [ l ] 11,3 12,6
PT volume – upper [ l ] 6,3
Insulation thickness
[ mm ] 50
Type
Size in mm
Length of
anode in
mm
Size of
slope in
mm
H ΦD A B C E F G I J K L M N
TČ 400-2 1835 670 320 880 1000 1100 1460 345 1000 1521 910 1490 560 370 Φ33x750 1930
TČ 500-2 1853 750 370 930 1095 1195 1465 370 1095 1498 960 1465 560 310 Φ33x850 1970
GB