Gorenje SGT 2400 B, Instruction Manual, Page: 50 / 119

50
IMPORTANT:
Always add 400ml water direct to the boiler after cleaning to prevent damaging the steam station.
When cleaning, never unscrew the boiler cap whilst the unit is pressurized. Steam will shoot out and
burn you. Always switch off, unplug and leave overnight before commencing to clean the boiler.
Do not use chemical descaling agents or vinegar as they may damage your appliance.
DRAINING THE WATER
1. Disconnect the power cord from mains supply outlet.
2. Press the water tank release button and pull out the water tank, see Fig 1
3. Open the water inlet cover
4. Empty the water in the tank holding on it upside down as fig.4
5. Close the water inlet cover
6. Replace the water tank in its place.
Fig 1 Fig 4
Fig 7 Fig 8 Fig 9
Fig 10 Fig 11