Gorenje SGT 2400 B, Instruction Manual

Page: 45 / 119

45
HINT FOR IRONING
1. Sort out the articles to be ironed according to the type of fabric. This will minimize the frequency of
temperature adjustment for different garment.
2. Test ironing a small area on the backside or inside the garment if you are unsure about the type of
fabric. Start with a low temperature and increase gradually.
3. Wait for 2 minutes before ironing heat sensitive fabrics. Temperature adjustment needs certain time
to reach the required level no matter it is higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to prevent shine
marks
READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILIAR TO THE FOLLOWING.
Temperature Control Setting
.
Acetate
. Elastsne
. Polyamide
. Polypropylene
. Cupro
. Polyester
. Protein
. Silk
. Triacetate
. Viscose
. Wool
. Cotton
. Linen
OPERATING INFORMATION
The appliance has a high technology low-pressure steam chamber that can be heated up in short time.
Water is converted to steam vapor in the chamber and transported to the iron unit through the supply
cord.
HOW TO USE THE CABLE SUPPORT
1. Unwind and straighten the supply cord.
2. Install the cable support showing.
3. Place the supply cord onto the hook
of the cable support showing.
Fig A