Gorenje SGT 2400 B, Instruction Manual, Page: 49 / 119

49
9. For the memory setting simply once press the water hardness setting button, the icon will
disappear from the LCD with a beep sound.
SPRAYING
This function can be used any time and is not affect any setting.
1. Remove the spray button as per fig 5
2. Fill the water tank as per fig 6
3. Replace the water tank in its place.
4. Aim the nozzle to the garment. Press the Spray Button.
Note:
It may be necessary to press the spray button a few times to start this function.
HOW TO CLEAN THE STEAM GENERATOR
To extend the life of your steam station and to avoid a build up of scale, it is essential that you rinse out
the boiler, after the
icon start the flashing in the LCD.
1. The icon will blink to indicate you to clean the boiler.
2. Press the Power On/ off switch, the base
console will switch to “Standby mode” with a beep sound.
3. Disconnect the power cord from mains supply outlet.
4. Allow the appliance cool down fully, overnight is advisable
5. Turn the steam station upside down and pull back the boiler cap cover as Fig 7.
6. Unscrew the boiler cap by using the provided key and empty out any water as fig 8 and Fig 9
7. Pour one cup of tap or filtered water through the boiler underneath hole as Fig 10
8. Shake the appliance gently then empty out all the water as Fig 9
9. Repeat this operation until the water from the boiler comes out clear and clean.
10. When cleaning is finished pour 400ml fresh tap or filtered water into the boiler as Fig 10
11. Screw the boiler cap back on again without using excessive force as Fig 11
12. Replace the cover.
13. The unit is now ready to use.
Fig 5 Fig 6