Gorenje Karim IT646KR Detailed Instructions For Use Download Page 43

Page: 43 / 48

CONNECTING THE COOKING
HOB TO THE POWER MAINS

- Power mains protection must conform to the relevant regulations.

- Before connecting the appliance, make sure the voltage indicated on the rating plate

conforms to the voltage in your power mains.

- There should be a switching device in the electrical installation that can disconnect

all poles of the appliance form the power mains, with a minimum clearance of 3 mm

between the contacts when open. Suitable devices include fuses, protective switches

etc.

- The connection should be adjusted to the current and fuses.

- After installation, the parts carrying electrical current and insulated parts shall be

protected against contact.

The appliance may only be connected by an authorised expert.
False connection can destroy parts of the appliance. In such case,
there is no right to warranty.
Disconnect the appliance from the power mains before any repair
or maintenance operation.

797666

797666_en.indd 43

13. 05. 2021 12:48:46

Summary of Contents for Karim IT646KR

















































Search results

Summary of Contents for Karim IT646KR

Reviews:

Related manuals for Karim IT646KR

Brands by name

Popular brands

Gorenje Karim IT646KR, Detailed Instructions For Use

Search results

Summary of Contents for Karim IT646KR

Reviews:

Related manuals for Karim IT646KR

Brands by name

Popular brands