AIR VENTS IN THE LOWER KITCHEN CABINET
- Normal operation of the induction cooking hob electronic components requires
sufficient air circulation.
A Lower cabinet with a drawer
- There must be an opening with a height of no less than 140 mm along the entire width
of the cabinet in the cabinet rear wall. In addition, there should be an opening of at least
6 mm in the front side, along the entire width of the cupboard.
- A horizontal partition panel should be installed underneath the cooking hob along its
entire length. There should be at least 20 mm of clearance between the lower end of
the appliance and the partition panel.
Adequate ventilation should be allowed from the rear side.
- The hob is fitted with a fan located in its lower part. If there is a drawer below the
kitchen cabinet, do not use it to store small objects or paper as these could, if sucked
into the fan, damage the fan and the cooling system. Moreover, do not use the drawer
to store aluminium foil or flammable substances or liquids (such as sprays). Keep such
substances away from the cooking hob. Danger of explosion! There should be at least
20 mm of clearance between the contents of the drawer and the fan inlet vents.
35
797666
797666_en.indd 35
797666_en.indd 35
13. 05. 2021 12:48:42
13. 05. 2021 12:48:42
