min 20
558-560
min 600
488-490
min 40
51
min 50
R10
595
510
81-86
50459
7
• Cooking hobs can be installed into worktops that are 30
to 50 mm thick.
• The kitchen furniture element underneath the hob
should not be fi tted with a drawer. If the kitchen
furniture element as a horizontal partition wall, it should
Before inserting the appliance into the opening in the
kitchen worktop, the supplied foam gasket must be
attached to the lower side of the glass ceramic (glass)
cooking hob (see fi gure above).
Do not install the
appliance without the foam gasket!
The gasket should be attached to the appliance in the
following way:
- Remove the protective fi lm from the gasket.
- Then, attach the gasket to the lower side of the glass,
approximately 2-3 millimetres from the edge (as shown
in the fi gure). The gasket must be attached along the
entire length of the glass edge and should not overlap
at the corners.
- When installing the gasket, make sure that the glass
does not come into contact with any sharp objects.
NOTE!
On some appliances the gasket is already installed!
Installing the foam
gasket
14
Worktop cutout
dimensions
