Gorenje HPWW12, Instructions For Installation And Start-Up

Page: 48 / 64

Water-to-water Heat Pump
48
operation flashes.
Turn the +/- (E) main navigation knob and set the
required time for end of operation (for example 22:00)
and confirm the selection. Press the ESC (C) key several
times to return to the MAIN MENU.
If the unit is connected to more than one heating circuit,
the Timer settings can be adjusted for each heating
circuit individually (Timer Operation for Heating Circuit 1,
Timer Operation for Heating Circuit 2, etc.).
Outside the time range of the Day Regime Operation,
the heat pump operates in the Night Regime (See
Section: Setting Room Temperature).
Operation Mode Selection – (A) key
This operation mode is used for selection among
various heating modes.
The selected heating mode is indicated with an
underline under the related symbol.
Automatic Operation
In Automatic Operation mode, the room temperature is
controlled by the Timer.
Characteristic features of Automatic Operation mode:
Heating cycles comply with setting of the Timer
Operation (See Section: Timer Operation) and the heat
pimp operates according to temperature settings for day
and night operations (See Section: Setting of Day
Temperature); automatic change to Daylight Saving
Time.