Gorenje HPWW12, Instructions For Installation And Start-Up

Page: 47 / 64

Water-to-water Heat Pump
47
Timer Operation
This program is used for setting DAY and NIGHT
operation modes.
Confirm every selected setting by pressing the OK
(D) key.
Press the OK (D) key and Time of Day and Date will
appear on the display.
Turn the +/- (E) main navigation knob to Timer Operation
– Heating Circuit 1. Confirm the selection.
The sign Pre Selection appears on the display. Confirm
the selection.
Currently selected DAYS IN WEEK flash (from Monday
to Friday), showing which days are covered by Timer
Operation.
Turn the +/- (E) main navigation knob and select the
required days in the week (from Monday until Friday).
Confirm the selection.
Turn the +/- (E) main navigation knob one increment to
the RIGHT to set the START Timer Operation in Day
Mode function. Confirm the selection.
The currently selected time of heat pump operation
starts to flash. Turn the +/- (E) main navigation knob and
set the required time for heat pump operation start in the
day operating regime (for example 08:00) and confirm
selection.
Turn the +/- (E) main navigation knob one increment to
the RIGHT to set the STOP Operation . Confirm the
selection.
The currently selected time of end of heat pump