Glass 40°
A gentle dishwashing program with a low temperature for washing fragile items made of crystal/glass.
Remember to use a small amount of detergent and to place items so that they do not touch each
other during the wash. See also
in the chapter
. Porcelain that
has just been used without dried leftovers can also be washed using this program.
Hygiene 70°
This program is ideal to use where demands on hygiene are extra high, e.g. for baby bottles and
cutting boards. The temperature is high both in the main wash and in the final rinse.
Night 55°
A quieter dishwashing program, suitable for running at night. The program time is extended.
Remote (WiFi)
You can remote control this dishwasher with your smartphone/tablet. Connect the dishwasher to your
wireless network to be able to remote control and start the dishwasher using the
ConnectLife
app.
See the chapter
.
To remote start the dishwasher, press
and then
. APP will flash on the dishwasher's display.
Close the door. The status light will flash slowly, indicating that remote start is activated.
In the
ConnectLife
app, select and start a program.
If the door is not closed within 2 minutes, the machine switches off.
Clean (Self-clean)
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid – add it to the dishwasher's manual detergent compartment. (Detergent is not automatically
dispensed with the function Automatic detergent dispensing.) Special dishwasher cleaners are also
available on the market. For the removal of limescale deposits, see
in the chapter
.
The dishwasher will indicate at regular intervals that Self-clean needs to be run.
Select option
Press the options to activate them. (The available options vary between programs.)
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed
and
closed the door.
1. Press
once to activate Delayed start. Press several times, or hold it in, to set the desired number
of hours. The time for Delayed start is shown on the display.
2. Press
. Close the door. The timer counts down and the dishwasher starts after the selected
delay.
If you want to cancel the Delayed start option, open the door then press and hold
for three seconds.
Not available for: Self-clean
17
