Options
Settings
You can activate this setting when using 3-in-1/
All-in-one detergent. The dishwashing programmes
automatically adapt to provide the best possible
dishwashing and drying results every time. If this setting
is activated there is no need to add rinse aid since this
option disables rinse aid dispensing. It also reduces the
amount of salt added to the water softener. Note that
salt must be put in the salt compartment.
3:00 (Off)
3:01 (On)
TAB
(3-in-1/all-in-one detergent)
3.
NOTE!
In order to achieve good dishwashing results, it is
essential to check which type of detergent or
all-in-one product best suits your needs! Read the
detergent packaging carefully for information on
proper use. Always follow the directions for use or
information on the detergent packaging!
The dishwasher uses a buzzer to indicate when a
programme is finished or when a fault has occurred.
4:00 - 4:03
Buzzer volume
4.
Self-cleaning programme for antibacterial cleaning of
the dishwasher tub, spray arms and spray pipes.
5:00 (Off)
5:01 (On)
Self-cleaning programme
5.
This programme can be run (with no dishes in the
machine) using normal dishwasher detergent, citric acid
or one of the dishwasher cleaners available on the
market. For the removal of limescale deposits see also
the section Limescale deposits in the chapter Care and
cleaning.
Start the programme by activating the setting and then
closing the door.
10
