Care and cleaning
Coarse filter
The coarse filter traps larger food particles, which cannot
get past the drainage pump. Empty the coarse filter as
necessary.
Coarse filter
1
Lift the coarse filter by the handle.
2
Empty the coarse filter. Remember to replace it!
Fine filter
Debris that collects on the fine filter is automatically rinsed
away during each wash. However, the fine filter and its pipe
section should be cleaned a couple of times a year.
Fine filter
1
Turn the handle anticlockwise.
2
Lift the filter straight up using the handle. Free the coarse
filter to clean the fine filter.
3
Replace in reverse order. Check that the edges seal
properly when replacing the fine filter.
4
Lock the filter in place by turning the handle clockwise
to the stop position. The handle should point straight
out from the dishwasher.
NOTE!
The dishwasher must not be used without the filters in
place!
Dishwashing results may be affected if the coarse filter is
incorrectly fitted.
Drainage pump
The pump can be accessed from inside the dishwasher.
1
Cut the power to the dishwasher by pulling out the plug
from the wall socket!
2
Remove the coarse filter and the fine filter.
3
In order to inspect the drainage pump, remove the
coloured stop on the right in the bottom drain.
4
By inserting your finger into the hole you can turn the
pump blade to release anything blocking it.
5
Replace the drainage pump stop along with the fine and
coarse filters.
6
Plug the machine in again.
If the dishwasher still does not start and a whirring sound
is heard, the overflow protection has been activated.
•
Shut off the water.
•
Remove the plug from the wall socket.
•
Call the service department.
Drainage pump stop
NOTE!
Do not forget to replace the drainage pump stop.
11
