Spray arms
Holes and bearings can sometimes become blocked.
Remove any debris using a pin or the like. The spray arms
also have holes underneath.
To facilitate cleaning you can remove the spray arms.
Remember to fit them firmly back into place afterwards.
Lower spray arm
•
Pull the lower spray arm straight up to release it.
Upper spray arm
1
Pull out the upper basket.
2
Unscrew the spray arm bearings counterclockwise to
remove the spray arm from the upper basket.
Door
When cleaning the edge around the door, use only a slightly
damp cloth (with a little cleaner if necessary).
Limescale deposits
The dishwasher tub is made of stainless steel and is kept
clean through normal use. If you have hard water, limescale
deposits may build up in the dishwasher. If this happens,
run a self-cleaning programme with two tablespoons of citric
acid in the detergent compartment (with no dishes in the
machine). The chapter Settings describes how to activate
the Self-cleaning programme setting.
Front panel
Keep the buttons clean and free from grease. Wipe them
clean with a dry or slightly damp cloth. Never use cleaners
– they can scratch the surface. Use the main power switch
to turn off the dishwasher before cleaning the buttons to
avoid activating any buttons unintentionally.
12
