Action
Possible causes
Problem
Press and hold Start/Stop until the
display shows
(the door
open symbol). This indicates that
the dishwasher is ready to start.
The Start/Stop start button has
been pressed for too short a time.
The dishwasher does not start.
Check.
The door is not properly closed.
Check.
A fuse/circuit breaker has been
tripped.
Check.
The plug is not plugged into the
wall socket.
Check.
The water tap is turned off.
Check.
Overflow/leaks.
Turn off the water tap. Pull out
the plug and call the service de-
partment.
A whirring sound (the drainage
pump) is heard from the dishwash-
er and does not stop when the
power is cut with the On/Left-on
mode button.
Press and hold Start/Stop for
three seconds if you want to can-
cel the Delayed start option.
Check that the Delayed start op-
tion has not been selected.
Loosen the drainage hose where
it connects to the sink unit's water
trap. Check that no debris has
fastened. Is the cone-shaped part
of the pipe cut to an inner diamet-
er of at least 14 mm?
Blocked drainage hose.
Water remains in the dishwasher.
Check that the hose is free from
kinks and sharp bends.
Kink in drainage hose.
Clean the coarse and fine filters.
The filters are blocked.
Clean the drainage pump. See the
section Care and cleaning.
Debris in the drainage pump.
Clean with washing-up brush and
low foaming cleaner.
Dirt around the seals and in
corners.
Bad odour in dishwasher.
Run a programme with a higher
temperature about once a month.
Low temperature programmes
have been selected for a pro-
longed period.
21
