INSTALLATION
519
30-94
596
573
550
54
37
7
680
-760**
30
67
0
19
5
444
49
70
0
821*
-87
2
133
-18
3
9
559
1198
[mm]
*Remove locking nuts for an installed height of 820-821 mm.
**Door length.
It is important that you read through and follow
the instructions and directions below. Conduct
installation and connection in accordance with the
separate installation instructions.
SAFETY INSTRUCTIONS
• Connections to electricity, water and drainage
must be performed by a qualified professional.
• Always follow applicable regulations for water,
drainage and electricity.
• Take care during installation! Wear protective
gloves! There must always be two people!
• Place a watertight protective tray on the floor
beneath the dishwasher to prevent damage
from any water leaks.
• Before screwing the dishwasher into place,
test the dishwasher by running the Rinse &
Hold programme. Check that the dishwasher
fills with water and drains. Check also that
none of the connections leak.
WARNING!
The ventilation opening in the lower part of the
door must not be blocked by a rug, carpet or
similar furnishing.
WARNING!
Turn off the water supply when installing the
dishwasher!
WARNING!
The plug must be disconnected or power to
the socket turned off while the work is carried
out!
SETUP
• The recess and connection dimensions are
included in the separate installation
instructions. Check that all dimensions are
correct before starting the installation. Note
that the height of the cover door can be
adjusted to match other fittings.
• Make sure the area on which the dishwasher
is to be installed is firm. Adjust the adjustable
feet so that the dishwasher is level. Tighten
the lock nuts.
DRAINAGE CONNECTION
See the separate installation instructions for
necessary information.
26
