background image

141

186

Interferences from the ambient (for example electrical wiring) 
could induce signalization of different faults. In such cases:
-  switch the appliance off, and wait for a few seconds;
-  plug in the appliance and repeat the drying program.
If the fault repeats, call authorized service shop.

Warranty shall not apply in case of failures due to interferences 
from the environment (lightning stroke, power supply circuit 
faults, natural disasters).

15

Troubles

Trouble

Check

Appliance does not 
work:

• If there is current in the socket and if the fuse is functioning.
• If the plug is correctly inserted into the socket.

There is current in 
the socket, but the 
drum is not rolling:

• If the door is closed tightly (press it towards the appliance).
• If the program runs according to instructions.
• If the container is full (only with condensation dryer).
• If appropriate drying time is selected.

Laundry is not dry:

• If the 

fi

 lter is clean.

• If the condensation device is clean (only with condensation dryer).
• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too big.
• If the evacuation tube is too long (only with evacuation dryer - max 2 m).
• If the laundry loaded in the drum has not been spun enough or if 

appropriate drying time has been set.

• If the room is too hot (over 25°C, applies for condensation dryer).

The condensation is 
inadequate:

• If the room temperature is too high.
• If the condensation device is clean.

Unevenly dried 
laundry:

• If the amount of laundry to be dried is not too big.
• If there are only large pieces of laundry (large and small pieces should 

be dried together).

• If different fabrics are dried together (group the laundry according to the 

type of fabrics).

The machine signals errors or failures in operation by 

fl

 ashing signal LED's.

Record number of 

fl

 ashes representing the failure, shut the machine off and call nearest 

authoriyed service. 

If a failure occurs due to incorrect installation or inappropriate use of the appliance, the guarantee 
is void, and the repair bill shall be settled by the user. 

Summary of Contents for D62225





















Reviews: